Maximum Philippines
3% x 3% AR-AFFF
3% x 3% AR-AFFF
Couldn't load pickup availability

Description
Chemguard 3% x 3% AR-AFFF is a specially formulated, free flowing, viscous, aqueous film forming foam concentrate. It forms a vapor suppressing aqueous film on hydrocarbon type fuels or a polymeric membrane on polar solvent/water miscible type fuels. Chemguard 3% x 3% AR-AFFF is intended for use at a proportioning rate of 3% (3 parts AR-AFFF to 97 parts water) on hydrocarbon fuels such as gasoline, kerosene, diesel, etc., and on polar solvent fuels such as alcohols, ketones, esters, etc. Chemguard 3% x 3% AR-AFFF is specifically formulated for Topside, or Type II and Type III applications.
FEATURES
- U.L. listed, Foam Liquid Concentrate
- Used at a 3% proportioning rate on both hydrocarbon and polar solvent fuels
- Suitable for use with either fresh or salt water
- Excellent wetting characteristics when used in combating Class “A” fuel type fires
- Suitable for use with fiberglass, polyethylene or stainless steel. 3% - 3% AR-AFFF is not compatible with galvanized pipe or fittings in an undiluted form.
- Suitable for use on hydrocarbon or polar solvent type fuels
- Suitable for use with both air-aspirating foam and standard water fog nozzles
- Economized for Topside applications
PROPORTIONING
- Fixed or portable in-line eductors
- In-line balanced pressures and pump pressure proportioning systems
- Around the pump proportioners
- Handline, air-aspirating nozzles with fixed eductor pickup tube
DISCHARGE DEVICES
- Foam Chambers
- Standard water fog nozzles for handlines and monitors
- Air-aspirating foam nozzles
- Foam makers for use with either Floating roof storage tanks or Dike/Bund protection systems
FOAMING PROPERTIES
Aspirating type discharge devices typically generate expansion ratios between 6-10 to 1 when 3% - 3% AR-AFFF is mixed with water at the correct ratio. Non-aspirating type devices will typically generate expansion ratios of between 2-4 to 1. Expansion ratios are dictated by the type of discharge device, flow rate and discharge pressure
TYPICAL PROPERTIES AT 77ºF (25ºC)
| Appearance | Amber Gel-Like Liquid |
| Specific Gravity | 1.02 g/ml |
| pH | 7.7 +/- 0.3 |
| Viscosity | 1500 cP Minimum |
Contact us: 09175060226 (Viber)
09175940206 (Viber)
09171275336 (Viber)
Email us: maximumbuilders.ph@gmail.com
maximumengineering2011@gmail.com
albertgregore26@gmail.com
Share
